How To Plant Liriope Lilyturf Plants

When planted right and in the right spot, Liriope are among the easiest plants to grow. They are ideal for use in the landscape massed as groundcover, in groupings, or as a border edger along walkways, paths and other structural surfaces. They provide a nice grassy texture and flower color in mixed container gardens.

Here's a breakdown of what you need to know to plant and care for Liriope...



Cultural Preferences



Soil Preferences

Liriope tolerates a wide range of soils and soil conditions, except for constantly soggy or wet soils. When growing in container use a good potting soil, potting mix, or 50/50 combination of thereof.


Testing Soil Drainage

If you are uncertain about soil drainage in the area you intend to plant your Liriope, it's well worth taking the time to test the drainage before planting. 

To test soil drainage, dig a hole 12" wide by 12" deep. Fill the hole with water and let it drain. Then, after it drains, fill it with water again, but this time clock how long it takes to drain. In well-drained soil the water level will go down at a rate of about 1 inch an hour. A faster rate, such as in loose, sandy soil, may signal potentially dry site conditions and possibly a need to add organic matter to help retain moisture. A slower rate indicates poor draining soil and is a caution you need to improve drainage or look for plants that are more tolerant of wet conditions.



Soil pH Preference

Liriope grows best in a moderately acid to neutral soil ranging from 6.0 to 7.0 on the pH scale. Most average garden soils fall between a pH range of 6.0 to 7.0.   


Testing Soil pH  

Soil pH is a measurement of the alkalinity or acidity of soil and is measured on a scale of 1-14, with 7 as the neutral mark. Any measurement below 7 indicates acid soil conditions, and anything above 7 indicates alkaline. If you're unsure about the pH of your soil, and whether or not it's suitable for growing Liriope, it's a good idea to test the soil pH in the planting area. 

You can quickly test soil pH with an inexpensive soil pH tester probe. To raise the pH (make more alkaline) you can add pelletized limestone to the soil. To lower the pH (make more acid) you can apply Soil Sulfur, Aluminum Sulfate, or Chelated Iron. Adding organic compost to the soil or using compost as mulch can also help to increase acidity and maintain acid soil conditions.




Light Preferences

Most Liriope will grow in part shade to shade. Some varieties, such as Variegated Liriope, will tolerate full sun. Know the sun preferences for the specific variety of Liriope you intend to plant.

Note:  On every plant page in Wilson Bros Gardens you will find the sun preferences under the Description tab in the Plant Details section.



How To Plant Liriope / Lilyturf

Scroll down for container planting instructions


Site Preparation For Mass Planting


Weed Elimination

Before planting, eliminate existing weeds or grasses in the planting area. You can pull weeds by hand or spray them with a solution of glyphosate-based broad spectrum weed killer. Wait at least two hours after spraying a glyphosate-based product before you begin planting. Before using any chemical read the mixing and application instructions on the label. 


Soil Preparation

Tilling the soil in the planting area is optional. There are several reason we usually don't recommend it. Tilling on sloped ground loosens soil making it more susceptible to erosion in the event there comes heavy rainfall. Tilling can also bring buried dormant weeds seeds to the surface. Freshly tilled ground is a perfect environment for weed seeds to sprout in. If you do decide to till, we recommend the application of a landscape landscape weed preventer to the soil surface. 

Caution:  If you are planting groundcover plants under established trees, be aware that tilling can cause serious damage to tree roots, which can effect the health of a tree. The feeder roots of trees can often extend well beyond the perimeter of the canopy.


How Many Plants?

If you are planting your Liriope as a groundcover over a large area, to determine how many plants you will need, it is often necessary to determine total square feet of the planting area. Once you have the square footage, then you can determine how far apart you will space plants in the planting area. (Under the description tab on every plant page in Wilson Bros Gardens you will find a spacing recommendation.) Click on the links below to get helpful tips.





Step-By-Step Planting Instructions


Step 1

Set and space all plants out in the planting area before starting to plant. Alternatively, you can use marking paint to mark the spot where each plant will go, which is often necessary when planting on steep slopes, where plants in containers will not stay put. 

If there will be more than one row of plants, begin by setting out or marking one straight row of plants. It's best to start along the edge of the planting bed making sure to space plants at a distance far enough from the edge of the planting bed to allow for future spreading. For example, plants with a recommended spacing of 24" apart should be spaced at least 12" from the edge of the bed (or surfaced area) to the center of the plant. After setting out the first row, stagger the plants on the second row and so on until the space is filled.




Step 2

Depending on the type, fertility and porosity of the soil in the planting area, you might consider amending the native soil. When planting in heavy clay or poor soils mix in organic matter such as composted manure or a good planting mix at a 50/50 ratio with the soil. When planting in a sandy, quick-draining soil amending with top soil, organic compost, or peat moss will help to retain moisture and supply vital plant nutrients. When planting in a moist but well-drained soil of average fertility there is no need to amend soil.


Step 3

To remove your plant from the container it was growing in first squeeze the sides of the pot to loosen root ball. Then, firmly grasp the base of the plant and gently lift and remove it from its container. If the root ball is stuck in the container use a snipping tool or utility knife to cut the container away. After having removed the plant from the container, gently loosen some feeder roots around the surface of the root ball. 


Step 4

Set your plant in the planting hole so that the top edge of the root ball is at or slightly above ground level to allow for settling. It may be necessary to place some of your backfill soil mixture in the bottom of the hole to achieve proper planting height.



Step 5

After setting your plant in the planting hole , use one hand to hold the plant straight while using your other hand to begin backfilling the soil mixture around the root ball, tamping as you go to remove air pockets. When you have filled the hole to the halfway point you can soak the soil. Then continue backfilling to the top edge of the root ball. To avoid suffocating your plant, avoid placing any any soil on top of the root ball.


Step 6 

After planting some or all all of your gLiriope plants, deeply water the entire planting area. For an extra boost, you can also water with a solution of Root Stimulator, which stimulates early root formation and stronger root development. Root Stimulator reduces plant shock and promotes greener, more vigorous plants.


Step 7

Apply a 1" layer of shredded wood mulch or bark around your newly planted Liriope. Avoid the use of freshly chipped or shredded wood for mulch until it has cured in a pile for at least 6 months, a year is better. 


How To Plant Liriope In Containers


Liriope are ideal for adding a grassy texture to mixed container garden plantings.

When growing in pots Liriope appreciate a moist but well-drained soil. Constantly soggy soil can and often will cause root rot or other harmful plant diseases. Therefore, plant Liriope in a container or pot that has a drainage hole(s) and use a quality potting soil or potting mix, or a 50/50 combination thereof, for planting. 

Make sure to choose a container with drainage holes at the bottom and one that is large enough to allow for 2 to 3 years of growth before shifting up to a larger size container. This might mean your planting pot would be 4 inches or more in width than the root ball of your plant. 

Container color will matter as well. Not only will you want to pick a color of container that goes well with the flower and foliage color of your Liriope, you'll also want to pick a container that matches the style of your home or other structures and other plants in the surrounding environment. 

Many nursery & garden centers offer a wide variety of containers to choose from. Before heading out to buy a container take pictures of your home and the surrounding environment. Doing so will help you to choose just the right color and style.



Container Planting Instructions


Step 1

Before filling your container with the soil mix, we recommend lining the bottom with shade cloth or a porous landscape fabric. This will keep the drain holes from becoming stopped up with soil. If you place gravel or other materials in the bottom of your container lay the fabric over it. 


Step 2

To remove your plant from the container it was growing in first squeeze the sides of the pot to loosen root ball. Then, firmly grasp the base of the plant and gently lift and remove it from its container. If the root ball is stuck in the container use a snipping tool or utility knife to cut the container away. After having removed the plant from the container, gently loosen some feeder roots around the surface of the root ball. 


Step 3

Pour a small amount of your soil mixture in the bottom of the container. Set your Liriope in the container and make necessary adjustments by adding or removing some soil so that the top edge of the root ball will sit 1/2 to 1" below the rim of the container.



Step 4

Backfill with your potting soil around root ball, tamping as you go, until the level of potting soil is even with the top edge of root ball.


Step 5

Water thoroughly until water starts to drain from the holes in the bottom of the container. Add more potting mix if settling occurs during watering.


Step 6 (Optional)

Apply a 1/2" layer of wood chips or sphagnum moss to soil surface to help conserve moisture.




Related Articles 






Plant Long & Prosper!

Questions? Contact Us!